TSG-6 ON-HOOK SECURE PHONES

Certified by the Committee on National Security Systems (CNSS), Tone Commander TSG-6 on-hook secure IP phones are available for deployment in SCIF (Sensitive Compartmented Information Facility) and SAPF (Special Access Program Facility) secure areas.

SPEAK WITH CONFIDENCE

Advanced TSG-6 On-Hook Secure VoIP Technology

CNSS Certified For Deployment In SCIFs And SAPFs

SIP Compliant, Certified, and Field Tested

TSG-6 IP Phone 7810

Now you can use advanced VoIP technology in TSG-6 on-hook secure applications. Certified by the Committee on National Security Systems (CNSS), Tone Commander TSG-6 on-hook secure IP phones are available for deployment in SCIF (Sensitive Compartmented Information Facility) and SAPF (Special Access Program Facility) secure areas. Tone Commander TSG-6 IP phones are designed to work with all VoIP platforms that support industry-standard SIP protocol.

– Large graphic display
– TSG-6 Class A and B Models
– 10/100 switched PC port option
– Made in USA

– Ten desi-less programmable keys
– Multifunction keys with indicators
– Power over Ethernet & local power options
– Optional 30-button expansion module

MODELS

7810PoE-TSGB

· TSG-6 Class: B
· 802.3af PoE: Midspan or Endpoint
· PoE Security Reset Switch: No
· Local Power: Optional
· Switched Ethernet PC Port: Yes

7810PoE-TSGA

· TSG-6 Class: A
· 802.3af PoE: Endpoint Only
· PoE Security Reset Switch: Yes
· Local Power: Optional
· Switched Ethernet PC Port: Yes

OVERVIEW

Tone Commander TSG-6 IP phones meet the stringent requirements specified in the CNSS (Committee on National Security Systems) Instruction No. 5000 and 5001. They have been tested for compliance and approved by the National Telecommunications Security Working Group. TSG-6 Class A versions are not dependent on any other equipment for on-hook security. They may be used in standalone applications within a secure area. The Class B version must be connected to an Ethernet switch collocated within the SCIF.

To meet TSG requirements, special positive-disconnect circuitry and ultra low-emissions technology ensures that no microphonic audio signals are produced on any wires leaving the phone when it’s on-hook.

It is designed for universal SIP compliance and has been certified on Tone Commander, Redcom, NEC, Genband, Unify, and Avaya platforms, and field tested on Cisco, Asterisk, and Broadsoft platforms.

Tone Commander TSG-6 products meet the requirements of the Intelligence Community Technical Specification ICD/ICS 705 for Sensitive Compartmented Information Facilities (SCIF), prepared by the National Counterintelligence Executive, which replaced DCID 6/9.

Department of Defense (DoD) Unified Capabilities (UC) Approved Products List (APL) approval of Tone Commander 7810 TSG-6 IP Phones as voice only, non-secure Assured Services Session Initiation Protocol (AS-SIP) End Instruments (AEI) has been granted under Tracking Number (TN) 1310601.

You can view the approval document here .

FEATURES

Screen Shot 2020-08-14 at 4.18.18 PM.png

SPECIFICATIONS

DoD Compliance

· Assured Services SIP (AS-SIP)
· Multi-Level Precedence & Preemption (MLPP)
· Secure Real-time Transport Protocol (SRTP)
· Transport Layer Security (TLS)
· Hypertext Transfer Protocol Secure (HTTPS)
· IPv4/IPv6 dual stack

Standards Compliance

· FCC Part 15
· Hearing Aid Compatible
· Section 508 Compliant
· UL, cUL Listed
· SIP Standard (IETF RFC3262+)
· QoS (IEEE 802.1q VLAN tagging, DSCP)

Network Compatibility

· Network Port: 10/100BaseT Ethernet
(PoE 802.3af on 7810PoE-TSGA and 7810PoE-TSGB only)
· PC Port: 10/100BaseT Ethernet
(PoE 802.3af on 7810PoE-TSGA and 7810PoE-TSGB only)
· Codecs: G.711u, G.711A, G.722, G.729A

Power Requirements

• 7810PoE-TSGA Power over Ethernet: 802.3af Class 2 (Endpoint Only)
• 7810PoE-TSGB Power over Ethernet: 802.3af Class 2 (Midspan or Endpoint)
• 7810-TSG: Local Power Only (not PoE)
• Local Power: 12VDC nominal @ 1A max.
(optional for 7810PoE-TSGA and 7810PoE-TSGB)

Physical

· Dimensions: 3.5" H x 9.6" W x 8" D, excluding handset
· Weight: 2.3lbs., including stand and handset

Environmental

· Operating Temperature: 32° to 104° F (0° to 40° C)
· Storage Temperature: 32° to 122° F (0° to 50° C)
· Humidity: 5% to 95% non-condensing

OPTIONS

8030X Button Expansion Module

This option adds 30 multifunction keys to the IP Phone 7810. The additional multifunction keys can be set up as Call Appearance keys, speed dial keys, Direct Station Select keys, or Feature Activator keys. All multifunction keys have both red and green lamp indicators for easy status viewing. This module is ideal for answering positions and high-density key applications.

Only one 8030X per telephone is supported.